Как установить maple 2017

You can use the installer.properties file generated by the -r flag or you can create your own using the following example as a template:

#Choose Install Folder

USER_INSTALL_DIR=C:\\Program Files\\Maple 17

#Install Desktop Shortcuts

#Choose Watcom Install Folder

#Maple Worksheet Association

#Choose the Type of Licensing

1. Open a command prompt window.

1. Browse to the directory in which your Maple17WindowsInstaller.exe or Maple17WindowsX86_64Installer.exe file is located.

1. Run the silent installation process with the command Maple17WindowsInstaller.exe -f installer.properties (32-bit Windows) or Maple17WindowsX86_64Installer.exe -f installer.properties .

Note: If you created your installer.properties file in a directory other than the directory in which the Maple17WindowsInstaller.exe or Maple17WindowsX86_64Installer.exe file is located, you must specify the path to the installer.properties file when you run this command.

Notes

1. The INSTALLER_UI=SILENT line is not added automatically to the installer.properties file if it was created with the -r flag during installation. If the -r flag was used to create the installer.properties file, INSTALLER_UI=SILENT must be added as the first item in the file.

1. The template assumes Maple 17 will be installed into the C:\Program Files\Maple 17 folder. If another location is desired, change the USER_INSTALL_DIR accordingly.

1. The template assumes Maple 17 desktop icons will be placed on your desktop. To change this, replace the lines in the «Install Desktop Shortcuts» section with:

1. If required, the location of the WATCOM compiler can be changed. The pathname must not contain any spaces. If you omit the WATCOM_INSTALL_FOLDER field entirely, the WATCOM compiler will not be installed.

1. The template assumes Maple 17 will be the default Maple version (assuming other versions of Maple are installed on the system). To change this, replace the lines in the «Maple Worksheet Association» section with:

1. Change the license server name (required) and add a port number (optional) accordingly

Additional Information

• You are not provided with any feedback when you run the installer in this mode

• While you can install the single-user version of Maple silently, it is not possible to activate the product at this time. After the silent installation of the single user version of Maple 17 is complete, from the Start menu, select All Programs , then Maple 17 , then Tools and then Activate Maple 17 .

Silently Uninstalling on Windows

1. To perform a silent uninstallation of Maple, at a command prompt, run the following command.

«C:\Program Files\Maple 17\uninstall\Uninstall Maple 17.exe» -i silent

Maple Toolbox Installation

If you have MATLAB installed, you can install a toolbox that provides an integration between Maple and MATLAB, where you can directly access all of the commands, variables and functions of Maple and MATLAB while working in either environment.

MATLAB Version Requirements

Maple 17 connectivity with MATLAB is supported for MATLAB® 2011b, 2012a, or 2012b. For the latest information on which MATLAB versions are compatible with Maple 17, visit http://www.maplesoft.com/products/system_requirements.aspx . Note that older and newer versions of MATLAB may work, but may not be tested by Maplesoft.

Install the Maple Toolbox During the Maple Installation Process

During the Maple installation process, the Maple installer will display a panel indicating that the installer has detected that MATLAB is installed. At this point, you can install a toolbox which will connect Maple with MATLAB by selecting the MATLAB version that you want to use from the list of available MATLAB versions. You can also skip the Maple Toolbox installation by selecting Do not configure at this time.

If the MATLAB Symbolic Math Toolbox is installed, another panel will prompt you to select either the Maple Toolbox or MATLAB Symbolic Math Toolbox as the default.

Install the Maple Toolbox After Installing Maple

To install the Maple Toolbox after Maple is installed, do the following:

• On Windows, run the batch file MapleToolbox.bat in the Maple install root directory. By default, C:\Program Files\Maple 17 . Follow the on-screen instructions.

• On Linux or Solaris, run the file MapleToolbox in your Maple install root directory. By default, $HOME/Maple17/ , Where $HOME is your home directory . Follow the on-screen instructions.

• On Macintosh, run the file MapleToolbox in your Maple install root directory. By default, /Library/Frameworks/Maple.framework/Versions/17 . Follow the on-screen instructions.

Getting Started With the Maple Toolbox

Start MATLAB and then open the MATLAB help system. To open the main Maple Toolbox help page, select Maple Toolbox from the table of contents.

OpenWatcom (Windows 32-bit only)

For the 32-bit Windows version, Maple 17 includes the OpenWatcom C compiler. This compiler is used for the Maple compiler feature, which allows you to compile some types of user-written Maple routines to speed up the performance of your code.

To use this feature, you must install the OpenWatcom C compiler when you install Maple 17. The OpenWatcom compiler requires that it be installed in a location whose name contains no spaces (the default is C:\watcom-1.3 ). During installation, you will have the opportunity to change this default location.

To remove the OpenWatcom C compiler after installation, follow these steps.

1. Delete the directory in which Watcom was installed.

1. Delete the WATCOM environment variable.

1. (Optional) Delete the Watcom paths from the INCLUDE environment variable.

1. (Optional) Delete the Watcom paths from the PATH environment variable.

Note: If you have installed the OpenWatcom compiler with a previous release of Maple, please install again to the same location.

Installing and Setting Up a Microsoft Visual C++ Compiler

Note: If you are using Windows Vista, Windows 7, or Windows 8, you will need to log into an account with administrative privileges to set up and install the Microsoft Visual C++ compiler.

To install and set up the required software on your computer, perform the following steps:

Download and Install Microsoft Visual C++ Express Edition

Download and install either (a.) Visual Studio Express 2012 or (b.) the full .NET Framework 4 with Visual Studio Express 2010. The instructions for both versions are given in the following sections.

1. Downloading Visual Studio Express 2012

Important: Visual Studio Express 2012 is supported only on Windows 7 SP1 and Windows 8 . Users with other versions of Windows should install the full .NET Framework 4 with Visual Studio Express 2010.

• To install Microsoft Visual Studio Express 2012 for Windows Desktop, do the following:

1. Go to http://www.microsoft.com/visualstudio/eng/downloads .

1. Expand the Visual Studio Express 2012 for Windows Desktop section.

1. Select your download language.

Note: After installation, you must register Visual Studio Express 2012 within 30 days.

1. Downloading .NET Framework 4 and Visual Studio Express 2010

• To install .NET Framework 4, do the following:

1. Go to http://msdn.microsoft.com/en-us/windowsserver/bb980924.aspx .

1. Scroll to the Download the Windows SDK for Windows 7 and .NET Framework 4 section, and then click Install Now .

Note: Make sure that you install the 64-bit Visual C++ Compiler component. This requires a full installation of the .NET Framework 4.

• To install Microsoft Visual C++ 2010 Express Edition (which is a free download), do the following:

1. Go to http://www.microsoft.com/visualstudio/eng/downloads .

1. Expand the Visual C++ 2010 Express section.

1. Select your download language.

Setting Up the Visual Studio C++ Compiler

Every time you launch the Standard Worksheet version of Maple your computer is automatically scanned for a suitable Microsoft Visual Studio C++ compiler. Supported compiler versions are: 2012, 2010 and 2008.

If your supported version of Visual Studio C++ compiler is not detected, you can manually define the %LIB% , %INCLUDE% and %PATH% environment variables used by the compiler or you can set up the Microsoft Visual C++ compiler for Maple by specifying the path of either the vcvars64.bat file (for Visual Studio 2010 Express) or the vcvarsx86_amd64.bat file (for Visual Studio 2012 Express) created during the Maple installation process. To specify the path of the file do the following:

• If Maple is already installed on your computer, you can run a command within Maple to specify the path of the file. Perform the following steps:

1. Open Maple.

1. At the Maple prompt, type Compiler:-Setup() and press Enter .

1. In the dialog box, specify the full path of either:

• the vcvars64.bat file (if you are using Visual C++ 2010 Express)

or

• the vcvarsx86_amd64.bat file (if you are using Visual Studio 2012 Express)

1. Close Maple.

• Note: The Compiler:-Setup() command is available in the Standard Worksheet version of Maple. If you are using the Command line version of Maple you must manually define the %LIB% , %INCLUDE% and %PATH% environment variables.

Verifying Video Card Driver Requirements

To optimize the performance of graphics in Maple 17, it is strongly recommended that you install the latest driver software available for your video card. Before using Maple 17, follow the steps in this section to verify and, if necessary, upgrade your video card driver software.

Identifying Your Video Card Type

32-bit and 64-bit Windows

1. Do one of the following to open the Device Manager window:

• (Windows XP) Select Start , then Run . In the Open field, enter devmgmt.msc and click OK.

• (Windows Vista, and Windows 7) Open the Start menu. In the Start Search field, search for devmgmt.msc. From the search results, click Device Manager.

1. In the Device Manager window, expand the Display adapters section. Your video card type is listed in this section (for example, RADEON X600 Series).

32-bit and 64-bit Linux and UNIX

Note: This step requires that you are logged into your computer as a root user or have sudo access. If you are using a network or shared computer, you may need to contact your system administrator.

1. At a command prompt, run the lspci command (the lspci command might be located in /sbin or /usr/sbin directories ).

1. In the output, search for a line that contains «VGA» or «Display controller». For example,

01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)

01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)

Macintosh

1. From the Apple menu, select About this Mac .

1. In the System Profiler, expand the Hardware section in the left pane and click Graphics/Displays . Your video card is displayed beside Chipset Model in the panel at the right of the window (for example, Chipset Model: ATI Radeon HD 2600Pro ).

Verifying and Upgrading Your Driver Software

32-bit and 64-bit Windows

1. In the Device Manager window, in the Display adapters section, right-click the entry for the video card used by your computer and select Update Driver. The Hardware Update Wizard is displayed.

1. When prompted to connect to Windows Update, select Yes, this time only and click Next .

1. Select Install the software automatically (Recommended) and click Next . The wizard checks whether a more current version of the driver software is available.

If the wizard indicates that the latest driver software is installed, click Finish to close the wizard. Your computer is configured to display graphics in Maple 17.

If the wizard indicates that a more current version of the driver software is available, follow the on-screen instructions to install the update.

32-bit and 64-bit Linux and UNIX

1. Identify the driver version used by your video card. See Identifying the Driver Version Used By Your Video Card for instructions.

1. Visit your video card vendor’s web site to check whether a more current version of the driver software is available. See Obtaining the Latest Driver Software for instructions.

If the version number of the latest driver software available from the vendor matches the version number of the driver software installed on your computer, your computer is configured to display graphics in Maple 17. If a more current version is available, download the driver software from the web site and install it on your computer.

Note: It is not recommended that you use driver software updates automatically detected by Linux or UNIX software upgrade utilities

Macintosh

• From the Apple menu, select Software Update.

If no driver software update is listed for your video card in the Software Update window, the latest version is installed on your computer. Your computer is configured to display graphics in Maple 17.

If a driver software update is listed, select the entry from the list and click Install . Follow the on-screen instructions to complete the installation.

Downloading and Installing Driver Updates From a Vendor’s Web Site

If you are using Linux or UNIX operating systems, or if you are using Windows or Macintosh operating systems and the driver software that was automatically detected does not function as expected, download and install the latest driver from the web site of the video card vendor.

Identifying the Driver Version Used By Your Video Card

32-bit and 64-bit Windows

1. In the Device Manager window, expand the Display adapters section.

1. Right-click the entry for the video card used by your computer and select Properties . A dialog box that contains information related to your video card is displayed.

1. Click the Driver tab. The driver version used by your video card is listed beside Driver Version at the top of the window.

32-bit and 64-bit Linux and UNIX

First, determine whether hardware accelerated graphics are turned on.

• In the root of your Linux or UNIX installation, run the glxinfo | head command.

If hardware accelerated graphics are turned on, you will see a line that reads direct rendering: Yes . If this line reads direct rendering: No , hardware accelerated graphics are not turned on.

You can search the package management system of your Linux or UNIX installation for drivers installed on your computer. Linux and UNIX distributions use different package management systems; the instructions below are provided for the two most common Linux distributions.

dpkg-based Linux distributions such as Ubuntu

To query which packages are installed on your system, run the dpkg -l command. (Note that this is a lower-case letter L.) This command will display several lines of output, so it is useful to limit the output using the grep command. Continuing with the example above, enter the following command to search for NVIDIA® drivers.

dpkg -1 | grep -i nvidia

If you have a hardware accelerated driver installed, you will see an output line such as nvidia-glx-177 . In this example, 177 is the major version number of the driver. The full driver version number is displayed in the second column. For example, it will look like 177.82-0ubuntu0.1 on a Ubuntu system.

Hardware accelerated ATI™ drivers are named fglrx on Linux. For example, the package name could be fglrx-amdcccle and the version number may look like 2:8.543-0ubuntu4.1 on a Ubuntu system.

Intel® integrated accelerated graphics hardware may contain intel in the package name or just the chipset information, such as i810.

rpm-based Linux distributions such as SuSE and Red Hat Enterprise Linux

To query which packages are installed on an rpm-based Linux system, run the rpm -qa command. This command will list every package installed on your computer, so you can limit the search by using the grep command. For example,

rpm -qa | grep nvidia .

Maple 2017 Installation and Licensing Guide

Copyright © 2017 Maplesoft, a division of Waterloo Maple Inc.

Maple 2017 Installation and Licensing Guide

Maple 2017 Installation Using a Single User License

32-bit Windows Single User Installation

For 32-bit Windows® 7, Windows® 8.1, and Windows® 10 single user installation, read this section. For 64-bit Windows 7, Windows Server® 2012, Windows 8.1, Windows 10, and Windows Server® 2016 single user installation, see 64-bit Windows Single User Installation .

During the installation, you will need your purchase code , generally sent to you in an email.

To install Maple 2017 on your Windows operating system, read and complete the following tasks

Pre-Installation Instructions

1. Check the System Requirements for your operating system.

1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the Maple files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements .

1. Close all programs.

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and double-click Maple2017.0WindowsX64Installer.exe from the install disc.

Double-click Maple2017.0WindowsX64Installer.exe from where you downloaded the file.

1. Follow the on-screen instructions.

1. In the Choose The Type of Licensing screen, select Single User License .

1. When prompted, enter the purchase code and the required information to complete activation.

1. If you activated successfully, you are ready to use Maple 2017. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions .

Install Maple 2017

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and double-click Maple2017.0WindowsX64Installer.exe from the install disc.

Double-click Maple2017.0WindowsX64Installer.exe from where you downloaded the file.

1. Follow the on-screen instructions.

1. In the Choose The Type of Licensing screen, select Single User License .

1. When prompted, enter the purchase code and the required information to complete activation.

1. If you activated successfully, you are ready to use Maple 2017. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions .

64-bit Windows Single User Installation

During the installation, you will need your purchase code , generally sent to you in an email.

To install Maple 2017 on your Windows operating system, read and complete the following tasks

Pre-Installation Instructions

1. Check the System Requirements for your operating system.

1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the Maple files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements .

1. Close all programs.

Install Maple 2017

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and double-click Maple2017.0WindowsX64Installer.exe from the install disc.

Double-click Maple2017.0WindowsX64Installer.exe from where you downloaded the file.

1. Follow the on-screen instructions.

Note: If you have MATLAB® 2016a, 2016b, or 2017a installed and would like to install a toolbox that connects Maple with MATLAB®, see Maple Toolbox Installation .

1. In the Choose The Type of Licensing screen, select Single User License .

1. When prompted, enter the purchase code and the required information to complete activation.

1. If you activated successfully, you are ready to use Maple 2017. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions .

Macintosh Single User Installation

For Macintosh® installation instructions, read this section.

During the installation, you will need your purchase code , generally sent to you in an email.

To install Maple 2017 on your Macintosh operating system, read and complete the following tasks:

Pre-Installation Instructions

1. Check the System Requirements for your operating system.

1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the Maple files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements .

1. Close all programs.

Install Maple 2017

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and double-click Maple2017.0MacInstaller.dmg from the install disc, then double-click Maple2017.0MacInstaller .

Double-click Maple2017.0MacInstaller.dmg from where you downloaded the file, then double-click Maple2017.0MacInstaller .

1. Follow the on-screen instructions.

Note: If you have MATLAB® 2016a, 2016b, or 2017a installed and would like to install a toolbox that connects Maple with MATLAB®, see Maple Toolbox Installation .

1. In the Choose The Type of Licensing screen, select Single User License .

1. When prompted, enter the purchase code and the required information to complete activation.

1. If you activated successfully, you are ready to use Maple 2017. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions .

64-bit Linux Single User Installation

During the installation, you will need your purchase code , generally sent to you in an email.

To install Maple 2017 on your 64-bit Linux® operating system, read and complete the following tasks.

Pre-Installation Instructions

1. Check the System Requirements for your operating system.

1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the Maple files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements .

1. Close all programs.

Install Maple 2017

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and run Maple2017.0LinuxX64Installer.run from the install disc.

Run Maple2017.0LinuxX64Installer.run from where you downloaded the file.

1. Follow the on-screen instructions.

Note: If you have MATLAB® 2016a, 2016b, or 2017a installed and would like to install a toolbox that connects Maple with MATLAB®, see Maple Toolbox Installation .

1. In the Choose The Type of Licensing screen, select Single User License .

1. When prompted, enter the purchase code and the required information to complete activation.

1. If you activated successfully, you are ready to use Maple 2017. If you had problems activating or chose not to activate during the installation, see Activating Single User Versions .

Shortcuts for Desktop and Applications menus

During installation, a maple2017.desktop file is created in the bin directory of your Maple 2017 installation. If you request the installer to have a shortcut placed on your desktop, this file is also created in the ~/Desktop directory. If you wish to have a shortcut placed in your Applications menu, the maple2017.desktop file can be copied to /usr/share/applications (which may require root access) or ~/.local/share/applications .

Activating Single User Versions

Starting Maple 2017 requires a Maple 2017 license file to operate. License files for earlier releases of Maple will not work with Maple 2017. You must activate the single user version of Maple 2017 to obtain your license file. If you are running a single user installer, you can activate during the installation process. If you do not activate during the installation process, follow the steps below.

1. Activation requires an Internet connection. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Start Standard Worksheet Maple 2017.

1. When prompted to activate, click Activate .

1. You will be prompted to enter your purchase code. If you are activating behind a proxy server, make sure to enter this information before clicking Next.

1. You will be prompted to enter additional information. Click Next when this is complete.

• On Windows 7, you can also activate using the Start menu shortcut: (All) Programs > Maple 2017 > Tools > Activate Maple 2017 . Note: If you are using Windows 7, right-click Activate Maple 2017 and select Run as administrator .

• On Windows 8.1, from Start screen swipe up from the middle of the screen or alternatively, move the mouse to the bottom left of the screen and click the downward arrow that appears. Under the Maple 2017 heading, right-click on the Activate Maple 2017 tile. Next, click the Run as administrator icon

• On Linux, you can also activate by running the activation script located in the bin directory of your Maple 2017 installation.

• On Macintosh, you can also activate by running the activation script located in the bin folder of your Maple 2017 installation. By default, /Library/Frameworks/Maple.framework/Versions/2017/bin .

A Maple 2017 license file ( license.dat ) will be saved in the license folder of your Maple 2017 installation. If you experience difficulties with activation, check our FAQs page at http://www.maplesoft.com/support/Faqs/Activation .

Maple 2017 Installation Using a Network License

32-bit Windows Installation Using a Network License

For 32-bit Windows 7, Windows 8.1, and Windows 10 installation using a network license, read this section. For 64-bit Windows 7, Windows Server 2012, Windows 8.1, Windows 10, and Windows Server 2016 installation using a network license, see 64-bit Windows Installation Using a Network License .

To install Maple 2017 on your Windows operating system using a network license, read and complete the following tasks.

Pre-Installation Instructions

1. Check the System Requirements for your operating system.

1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the Maple files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements .

1. Close all programs.

Install Maple 2017

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and double-click Maple2017.0WindowsX86Installer.exe from the install disc.

Double-click Maple2017.0WindowsX86Installer.exe from where you downloaded the file.

1. Follow the on-screen instructions.

1. In the Choose The Type of Licensing screen, select Network License .

1. Do one of the following, depending on whether you have a single or redundant license server setup.

• If you have a single license server setup:

1. Select Single Server , and then click Next .

1. Enter the name or IP address of the license server in License server .

1. Enter the port number of the license server in Port number .

• If you have a redundant license server setup:

1. Select Redundant Server , and then click Next .

1. Enter the names or IP addresses of the license servers in License server 1 , License server 2 , and License server 3 .

1. Enter the port numbers of the license servers in Port number 1 , Port number 2 , and Port number 3 .

1. Maple 2017 is now installed. Prior to using Maple 2017, you need to Configure the License Manager .

64-bit Windows Installation Using a Network License

To install Maple 2017 on your Windows operating system using a network license, read and complete the following tasks.

Pre-Installation Instructions

1. Check the System Requirements for your operating system.

1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the Maple files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements .

1. Close all programs.

Install Maple 2017

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and double-click Maple2017.0WindowsX64Installer.exe from the install disc.

Double-click Maple2017.0WindowsX64Installer.exe from where you downloaded the file.

1. Follow the on-screen instructions.

Note: If you have MATLAB® 2016a, 2016b, or 2017a installed and would like to install a toolbox that connects Maple with MATLAB®, see Maple Toolbox Installation .

1. In the Choose The Type of Licensing screen, select Network License .

1. Do one of the following, depending on whether you have a single or redundant license server setup.

• If you have a single license server setup:

1. Select Single Server , and then click Next .

1. Enter the name or IP address of the license server in License server .

1. Enter the port number of the license server in Port number .

• If you have a redundant license server setup:

1. Select Redundant Server , and then click Next .

1. Enter the names or IP addresses of the license servers in License server 1 , License server 2 , and License server 3 .

1. Enter the port numbers of the license servers in Port number 1 , Port number 2 , and Port number 3 .

1. Maple 2017 is now installed. Prior to using Maple 2017, you need to Configure the License Manager .

Macintosh Installation Using a Network License

For Macintosh® installation instructions, read this section.

To install Maple 2017 on your Macintosh operating system, read and complete the following tasks:

Pre-Installation Instructions

1. Check the System Requirements for your operating system.

1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the Maple files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements .

1. Close all programs.

Install Maple 2017

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and double-click Maple2017.0MacInstaller.dmg from the install disc, then double-click Maple2017.0MacInstaller .

Double-click Maple2017.0MacInstaller.dmg from where you downloaded the file, then double-click Maple2017.0MacInstaller .

1. Follow the on-screen instructions.

Note: If you have MATLAB® 2016a, 2016b, or 2017a installed and would like to install a toolbox that connects Maple with MATLAB®, see Maple Toolbox Installation .

1. In the Choose The Type of Licensing screen, select Network License .

1. Do one of the following, depending on whether you have a single or redundant license server setup.

• If you have a single license server setup:

1. Select Single Server , and then click Next .

1. Enter the name or IP address of the license server in License server .

1. Enter the port number of the license server in Port number .

• If you have a redundant license server setup:

1. Select Redundant Server , and then click Next .

1. Enter the names or IP addresses of the license servers in License server 1 , License server 2 , and License server 3 .

1. Enter the port numbers of the license servers in Port number 1 , Port number 2 , and Port number 3 .

1. Maple 2017 is now installed. Prior to using Maple 2017, you need to Configure the License Manager .

64-bit Linux Installation Using a Network License

To install Maple 2017 on your 64-bit Linux® operating system, read and complete the following tasks.

Pre-Installation Instructions

1. Check the System Requirements for your operating system.

1. Log on as an administrator or log on to an account, with appropriate read and write privileges, that will own the Maple files.

1. Ensure that you are connected to the Internet. If your computer does not have an Internet connection, please contact your distributor or Maplesoft customer service.

1. Check your video card driver requirements. For more information, see Verifying Video Card Driver Requirements .

1. Close all programs.

Install Maple 2017

1. Ensure that you have reviewed the Pre-installation Instructions.

1. Choose one of the following two options to launch the installer:

1. Place the install disc in the DVD-ROM drive.

1. Locate and run Maple2017.0LinuxX64Installer.run from the install disc.

Run Maple2017.0LinuxX64Installer.run from where you downloaded the file.

1. Follow the on-screen instructions.

Note: If you have MATLAB® 2016a, 2016b, or 2017a installed and would like to install a toolbox that connects Maple with MATLAB®, see Maple Toolbox Installation .

1. In the Choose The Type of Licensing screen, select Network License .

1. Do one of the following, depending on whether you have a single or redundant license server setup.

• If you have a single license server setup:

1. Select Single Server , and then click Next .

1. Enter the name or IP address of the license server in License server .

1. Enter the port number of the license server in Port number .

• If you have a redundant license server setup:

1. Select Redundant Server , and then click Next .

1. Enter the names or IP addresses of the license servers in License server 1 , License server 2 , and License server 3 .

1. Enter the port numbers of the license servers in Port number 1 , Port number 2 , and Port number 3 .

1. Maple 2017 is now installed. Prior to using Maple 2017, you need to Configure the License Manager .

Note: Starting from Maple 14, FlexNet, the license management software used in Maple, requires Linux systems to be LSB 3.0 compatible, which may require the additional installation of some additional packages. If you are receiving the «Error detecting HostID» error message when trying to activate Maple on Linux, please ensure that the appropriate packages are installed.

• On Ubuntu, ensure that the lsb-base and lsb-core packages are installed. The lsb-core package is not installed by default.

• On Red Hat, ensure that the redhat-lsb package is installed.

• On SUSE, ensure that the lsb package is installed. This package is not installed by default.

Shortcuts for Desktop and Applications menus

During installation, a maple2017.desktop file is created in the bin directory of your Maple 2017 installation. If you request the installer to have a shortcut placed on your desktop, this file is also created in the ~/Desktop directory. If you wish to have a shortcut placed in your Applications menu, the maple2017.desktop file can be copied to /usr/share/applications (which may require root access) or ~/.local/share/applications .

Silent (Unattended) Installation

It is possible to install the network version of Maple using an unattended mode option. There are two ways to perform an unattended installation of Maple:

• Using options specified directly in the command line

• Using an option file.

Using options specified directly in the command line

You can run an unattended installation without an option file by specifying the installation options directly in the command line. To run the unatttended installation this way, do the following:

32-Bit and 64-Bit Windows

1. Open a command prompt window.

1. Browse to the directory in which your Maple install file is located.

1. Run the unattended installation process with the appropriate command for your platform. For 32-bit Windows use the following syntax Maple2017.0WindowsX86Installer.exe —option optionvalue . For 64-bit Windows use Maple2017.0WindowsX64Installer.exe —option optionvalue . For example, on 32-bit Windows, use the command Maple2017.0WindowsX86Installer.exe —mode unattended to install Maple in unattended mode.

Linux

1. Browse to the directory where your Maple install file is located.

1. Run the unattended installation process with the appropriate command with the following syntax: ./Maple2017.0LinuxX64Installer.run —option optionvalue . For example, use the command Maple2017.0LinuxX64Installer.run —mode unattended to install Maple in unattended mode.

Mac OSX

1. Unpack Maple2017.0MacInstaller.dmg to get the Maple2017.0MacInstaller.app file.

1. Open a command terminal.

1. Browse to the MacOS folder inside the .app file (this is usually /Volumes/Maple2017.0MacInstaller/Maple2017.0MacInstaller.app/Contents/MacOS ).

1. Run the following command ./installbuilder.sh —option optionvalue . For example, on Mac OSX, use the command ./installbuilder —mode unattended to install Maple in unattended mode.

Using an Option File

32-Bit and 64-Bit Windows

1. Check the System Requirements for your operating system.

1. Close all programs, particularly any previous release of Maple.

1. Log on as administrator or ensure that you have administrator privileges.

1. Create an option file.

You can create your own options.txt file using the following example as a template:

installdir=C:\Program Files\Maple 2017

1. Open a command prompt window.

1. Browse to the directory in which your Maple2017.0WindowsX86Installer.exe or Maple2017.0WindowsX64Installer.exe file is located.

1. Run the silent installation process with the command Maple2017.0WindowsX86Installer.exe —optionfile (32-bit Windows) or Maple2017.0WindowsX64Installer.exe —optionfile (64-bit Windows), where is the name of the option file.

Note: If you created your option file in a directory other than the directory in which the Maple2017.0WindowsX86Installer.exe or Maple2017.0WindowsX64Installer.exe file is located, you must specify the path to the option file when you run this command.

Linux

1. Check the System Requirements for your operating system.

1. Close all programs, particularly any previous release of Maple.

1. Log on as administrator or ensure that you have administrator privileges.

1. Create an option file.

You can create your own options.txt file using the following example as a template:

Note: In the preceding example, replace with the full path to the directory that you want to install Maple 2017 in.

1. Open a command prompt window.

1. Browse to the directory in which your Maple2017.0LinuxX64Installer.run file is located.

1. Run the silent installation process with the command Maple2017.0LinuxX64Installer.run —optionfile , where is the name of the option file.

Note: If you created your option file in a directory other than the directory in which the Maple2017.0LinuxX64Installer.run file is located, you must specify the path to the option file when you run this command.

Mac OSX

1. Check the System Requirements for your operating system.

1. Close all programs, particularly any previous release of Maple

1. Log on as administrator or ensure that you have administrator privileges.

1. Create an option file.

You can create your own options.txt file using the following example as a template:

1. Unpack Maple2017.0MacInstaller.dmg to get the Maple2017.0MacInstaller.app file.

1. Open a command terminal.

1. Browse to the MacOS folder inside the .app file (this is usually /Volumes/Maple2017.0MacInstaller/Maple2017.0MacInstaller.app/Contents/MacOS ).

1. Run the silent installation process with the command ./installbuilder.sh —optionfile where is the name of the option file.

Note: If you created your option file in a directory other than the directory in which installbuilder.sh is located, you must specify the path to the option file when you run this command.

Available Installation Options

Option Name

Description

Allowed Values

Default Value

Platform Availability

Display the list of valid options

Display product information

Unattended Mode UI

none minimal minimalWithDialogs

Name of option file

Mac; Linux; Windows

Debug information level of verbosity

win32 unattended (Windows); osx text unattended (Mac); gtk xwindow text unattended (Linux)

Windows; Mac; Linux

en ar bg ca da nl et fr fi de el es es_AR he hr hu it ja lt ko pl pt_BR pt ro ru no sl sk sq sv sr tr zh_TW zh_CN va cy cs

Mac; Linux; Windows

C:\Program Files(x86)\Maple 2017

It has been determined that you currently have Maple 2017 installed at this location. Please choose whether to upgrade the installation or to uninstall the old installation first before reinstalling. You may also click the Back button to choose a new Maple installation pathname.

Mac; Linux; Windows

Custom label for desktop shortcuts

Make Maple 2017 the default application for Maple worksheet (.mw and .mws) and workbook (.maple) files

Install desktop shortcuts

MATLAB® Configuration. If enabled (1), you must also set the matlabpath option.

Mac; Linux; Windows

Path to MATLAB® installation

Mac; Linux; Windows

Default toolbox is either Maple or MATLAB® (only valid if the MATLAB® installation contains the MATLAB® Symbolic Toolbox™)

Mac; Linux; Windows

Type of Licensing

Mac; Linux; Windows

Single or redundant server setup

Mac; Linux; Windows

Name of license server

Mac; Linux; Windows

Port number on license server

Mac; Linux; Windows

Name of license server 1

Mac; Linux; Windows

Port number on license server 1

Mac; Linux; Windows

Name of license server 2

Mac; Linux; Windows

Port number on license server 2

Mac; Linux; Windows

Name of license server 3

Mac; Linux; Windows

Port number on license server 3

Mac; Linux; Windows

Enable periodic checking for Maple 2017 updates after installation

Mac; Linux; Windows

Check for updates now

Mac; Linux; Windows

Name of the proxy server. To use the system’s proxy server, leave blank

Mac; Linux; Windows

Port number on proxy server. To use the system’s proxy port, leave blank

Mac; Linux; Windows

User name for proxy server (if required)

Mac; Linux; Windows

Password for proxy server (if required)

Mac; Linux; Windows

Activate Maplesoft product license

Mac; Linux; Windows

Name of license server

Mac; Linux; Windows

Port number on license server

Mac; Linux; Windows

Additional Information

• You are not provided with any feedback when you run the installer in this mode

• While you can install the single-user version of Maple silently, it is not possible to activate the product at this time. After the silent installation of the single user version of Maple 2017 is complete, from the Start menu, select All Programs , then Maple 2017 , then Tools and then Activate Maple 2017 .

Silently Uninstalling Maple

1. To perform a silent uninstallation of Maple, at a command prompt, run the uninstall command, located in the /uninstall directory, as follows:

/uninstall/uninstall — mode unattended

Maple Toolbox Installation

If you have a 64-bit version of Maple and MATLAB® installed, you can install a toolbox that provides an integration between Maple and MATLAB®, where you can directly access all of the commands, variables and functions of Maple and MATLAB® while working in either environment.

MATLAB® Version Requirements

Maple 2017 connectivity with MATLAB® is supported for MATLAB® 2016a, 2016b, or 2017a. For the latest information on which MATLAB® versions are compatible with Maple 2017, visit http://www.maplesoft.com/products/system_requirements.aspx . Note that older and newer versions of MATLAB® may work, but may not be tested by Maplesoft.

Install the Maple Toolbox During the Maple Installation Process

During the Maple installation process, the Maple installer will display a panel indicating that the installer has detected that MATLAB® is installed. At this point, you can install a toolbox which will connect Maple with MATLAB® by selecting the MATLAB® version that you want to use from the list of available MATLAB® versions. You can also skip the Maple Toolbox installation by selecting Do not configure at this time.

If the MATLAB® Symbolic Math Toolbox™ is installed, another panel will prompt you to select either the Maple Toolbox or MATLAB® Symbolic Math Toolbox™ as the default.

Install the Maple Toolbox After Installing Maple

To install the Maple Toolbox after Maple is installed, do the following:

• On Windows, run the Maple toolbox installation file in the Maple install root directory, which is C:\Program Files\Maple 2017 by default. Follow the on-screen instructions.

• On Linux, run the Maple toolbox installation file in the Maple install root directory, which is $HOME/Maple2017/ by default, where $HOME is your home directory. Follow the on-screen instructions.

• On Macintosh, run the Maple toolbox installation file in the Maple install root directory, which is /Applications/Maple 2017 by default. Follow the on-screen instructions.

Getting Started With the Maple Toolbox

Start MATLAB® and then open the MATLAB® help system. To open the main Maple Toolbox help page, click Supplemental Software and select Maple Toolbox from the table of contents.

Graphics Issues for Linux Users

Installing the Maple Toolbox can cause issues with graphics in Maple and associated programs (for example, MapleSim). This is due to a graphics library conflict. To fix this, you need to delete some library files that come with MATLAB®.

To configure Maple Toolbox on Linux:

1. Open a command-line terminal.

1. Execute the following command to change to the library directory:

cd $MATLAB/sys/os/glnxa64/

Where $MATLAB is your MATLAB® installation directory.

1. Execute the following command to delete the libraries:

rm libstdc++*

OpenWatcom (Windows 32-bit only)

For the 32-bit Windows version, Maple 2017 includes the OpenWatcom C compiler. This compiler is used for the Maple compiler feature, which allows you to compile some types of user-written Maple routines to speed up the performance of your code.

To use this feature, you must install the OpenWatcom C compiler when you install Maple 2017. The OpenWatcom compiler requires that it be installed in a location whose name contains no spaces (the default is C:\watcom-1.3 ). During installation, you will have the opportunity to change this default location.

To remove the OpenWatcom C compiler after installation, follow these steps.

1. Delete the directory in which Watcom was installed.

1. Delete the WATCOM environment variable.

1. (Optional) Delete the Watcom paths from the INCLUDE environment variable.

1. (Optional) Delete the Watcom paths from the PATH environment variable.

Note: If you have installed the OpenWatcom compiler with a previous release of Maple, please install again to the same location.

Verifying Video Card Driver Requirements

To optimize the performance of graphics in Maple 2017, it is strongly recommended that you install the latest driver software available for your video card. Before using Maple 2017, follow the steps in this section to verify and, if necessary, upgrade your video card driver software.

Identifying Your Video Card Type

32-bit and 64-bit Windows

1. Do the following to open the Device Manager window:

• Open the Start menu. In the Start Search field, search for devmgmt.msc. From the search results, click Device Manager.

1. In the Device Manager window, expand the Display adapters section. Your video card type is listed in this section (for example, RADEON X600 Series).

Linux

Note: This step requires that you are logged into your computer as a root user or have sudo access. If you are using a network or shared computer, you may need to contact your system administrator.

1. At a command prompt, run the lspci command (the lspci command might be located in /sbin or /usr/sbin directories ).

1. In the output, search for a line that contains «VGA» or «Display controller». For example,

01:00.0 VGA compatible controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)

01:00.1 Display controller: ATI Technologies Inc RV280 [Radeon 9200] (rev 01)

Macintosh

1. From the Apple menu, select About this Mac .

1. In the System Profiler, expand the Hardware section in the left pane and click Graphics/Displays . Your video card is displayed beside Chipset Model in the panel at the right of the window (for example, Chipset Model: ATI Radeon HD 2600Pro ).

Verifying and Upgrading Your Driver Software

32-bit and 64-bit Windows

1. In the Device Manager window, in the Display adapters section, right-click the entry for the video card used by your computer and select Update Driver. The Hardware Update Wizard is displayed.

1. When prompted to connect to Windows Update, select Yes, this time only and click Next .

1. Select Install the software automatically (Recommended) and click Next . The wizard checks whether a more current version of the driver software is available.

If the wizard indicates that the latest driver software is installed, click Finish to close the wizard. Your computer is configured to display graphics in Maple 2017.

If the wizard indicates that a more current version of the driver software is available, follow the on-screen instructions to install the update.

Linux

1. Identify the driver version used by your video card. See Identifying the Driver Version Used By Your Video Card for instructions.

1. Visit your video card vendor’s web site to check whether a more current version of the driver software is available. See Obtaining the Latest Driver Software for instructions.

If the version number of the latest driver software available from the vendor matches the version number of the driver software installed on your computer, your computer is configured to display graphics in Maple 2017. If a more current version is available, download the driver software from the web site and install it on your computer.

Note: It is not recommended that you use driver software updates automatically detected by Linux software upgrade utilities

Macintosh

• From the Apple menu, select Software Update.

If no driver software update is listed for your video card in the Software Update window, the latest version is installed on your computer. Your computer is configured to display graphics in Maple 2017.

If a driver software update is listed, select the entry from the list and click Install . Follow the on-screen instructions to complete the installation.

Downloading and Installing Driver Updates From a Vendor’s Web Site

If you are using a Linux operating system, or if you are using a Windows or Macintosh operating system and the driver software that was automatically detected does not function as expected, download and install the latest driver from the web site of the video card vendor.

Identifying the Driver Version Used By Your Video Card

32-bit and 64-bit Windows

1. In the Device Manager window, expand the Display adapters section.

1. Right-click the entry for the video card used by your computer and select Properties . A dialog box that contains information related to your video card is displayed.

1. Click the Driver tab. The driver version used by your video card is listed beside Driver Version at the top of the window.

Linux

First, determine whether hardware accelerated graphics are turned on.

• In the root of your Linux installation, run the glxinfo | head command.

If hardware accelerated graphics are turned on, you will see a line that reads direct rendering: Yes . If this line reads direct rendering: No , hardware accelerated graphics are not turned on.

You can search the package management system of your Linux installation for drivers installed on your computer. Linux distributions use different package management systems; the instructions below are provided for the two most common Linux distributions.

dpkg-based Linux distributions such as Ubuntu

To query which packages are installed on your system, run the dpkg -l command. (Note that this is a lower-case letter L.) This command will display several lines of output, so it is useful to limit the output using the grep command. Continuing with the example above, enter the following command to search for NVIDIA® drivers.

dpkg -1 | grep -i nvidia

If you have a hardware accelerated driver installed, you will see an output line such as nvidia-glx-177 . In this example, 177 is the major version number of the driver. The full driver version number is displayed in the second column. For example, it will look like 177.82-0ubuntu0.1 on a Ubuntu system.

Hardware accelerated AMD® and ATI™ drivers are named fglrx on Linux. For example, the package name could be fglrx-amdcccle and the version number may look like 2:8.543-0ubuntu4.1 on a Ubuntu system.

Intel® integrated accelerated graphics hardware may contain intel in the package name or just the chipset information, such as i810.

rpm-based Linux distributions such as SuSE and Red Hat Enterprise Linux

To query which packages are installed on an rpm-based Linux system, run the rpm -qa command. This command will list every package installed on your computer, so you can limit the search by using the grep command. For example,