AlteraK.RU
Здравствуйте, работаю в Кубейсе 7, столкнулась с проблемой: стояли раньше плагины Waves v9r26, все отлично работало, но вскоре полетел ноут (ничего особенного, просто шлейф от матрицы отошел) я разобрала, починила. Оказалось, что Кубейс перестал видеть прагины, он при запуске выкидывал окна по поводу этих плагинов. раньше уже было такое, я полность сбивала весь ноут ( возврат к заводским настройкам, ну и естественно все все данные были стерты). Сейчас решила попробовала переустановить плагины — удалила все, на компе ничего не осталось от них, но при установки нового пакета ( при закуске установщика) выдает ошибку — Runtime error. Версию меняла — тоже не помогает. может кто сталкивался с подобной проблемой?
вот фото с ошибкой
Alterak Администратор Сообщения: 199 Зарегистрирован: 05 сен 2012, 11:49 Откуда: Сочи Контактная информация:
Reactivate & Recover Licenses
Follow these instructions to recover Waves licenses for lost, stolen, or damaged USB flash drives or computers.
- Launch Waves Central and log into your account.
Windows: via the desktop shortcut or via Start Menu > All Programs > Waves Central.
Mac:Applications > Waves Central. - Select the Licenses page.
- Select the Disconnected Devices tab. Use the arrow on the right to expand the list.
- Choose the license you want to recover.
- Use the Target Device for Licenses panel to select where you want to send the license. By default, a recovered license will be deactivated, and ready to be activated again.
You can also recover it to a USB flash drive or to your computer. For both OS X and Windows compatibility, your USB flash drive must be exFAT-formatted. For more information, click here. - Read the notice on the right and select “I Understand.”
- Click Recover Licenses.
Your Waves licenses are now recovered.
Each product license can be recovered only once per year. If you later find or retrieve a device for which a license has been recovered, connect it to your computer and log into Waves Central: The license recovery period (1 year) will then automatically reset.
In the event a replaced license is found, transfer of ownership or sale of the found license is strictly prohibited. Violation of this policy will result in the revocation of license recovery privileges for the associated account.
Here’s how to reactivate licenses if you reformat your hard drive, reinstall the operating system, or install a new hard drive:
As long as the computer or USB flash drive itself is the same, there is no need to recover your licenses as described above.
- If your licenses were activated to a USB flash drive, just connect the flash drive, launch Waves Central and log into your account, and you’re good to go.
- If your licenses were activated to the computer, make sure it’s connected to the Internet, launch Waves Central and log into your account. Your licenses will be reactivated automatically.
- If your licenses were activated to a USB flash drive which has since been reformatted, connect the flash drive to your computer, launch Waves Central and log into your account. Your licenses will be reactivated automatically.
- Installation & Activation
- Waves Central
Платформа в ознакомительном режиме: устранение ошибок¶
Причина: Повторный запуск контейнера.
Решение: Удалите рабочую директорию с файлами платформы и начните заново со скачивания файла docker-compose.yml.
2. Ошибка при запуске платформы после успешного развертывания:
ERROR: for node-1 Cannot create container for service node-1: Conflict. The container name "/node-1" is already in use by container "47cfd7a517e160d201ae969b24392ca0bc2b9720c73e7324dac45daaa24814cb". You have to remove (or rename) that conCreating node-2 . error ERROR: for node-2 Cannot create container for service node-2: Conflict. The container name "/node-2" is already in use by container "ccd28832f1fb5457186e50d5e5Creating node-0 . error tainer to be able to reuse that name. ERROR: for node-0 Cannot create container for service node-0: Conflict. The conCreating postgres . error eb8ac184f88195f1a560ee8ef7ade5c46f899d". You have to remove (or rename) that container to be able to reuse that name. ERROR: for postgres Cannot create container for service postgres: Conflict. The container name "/postgres" is already in use by container "d4bc6d758faafcc9b2bc352b9cbcc5dc909f2959059b7abf17db0088916506d1". You have to remove (or rename) that container to be able to reuse that name. ERROR: for node-1 Cannot create container for service node-1: Conflict. The container name "/node-1" is already in use by container "47cfd7a517e160d201ae969b24392ca0bc2b9720c73e7324dac45daaa24814cb". You have to remove (or rename) that container to be able to reuse that name. ERROR: for node-2 Cannot create container for service node-2: Conflict. The container name "/node-2" is already in use by container "ccd28832f1fb5457186e50d5e58f98ed3b35c944931589a42a0262a205a17393". You have to remove (or rename) that container to be able to reuse that name. ERROR: for node-0 Cannot create container for service node-0: Conflict. The container name "/node-0" is already in use by container "7ed421ac8c8c5ca91a916970c1eb8ac184f88195f1a560ee8ef7ade5c46f899d". You have to remove (or rename) that container to be able to reuse that name. ERROR: for postgres Cannot create container for service postgres: Conflict. The container name "/postgres" is already in use by container "d4bc6d758faafcc9b2bc352b9cbcc5dc909f2959059b7abf17db0088916506d1". You have to remove (or rename) that container to be able to reuse that name. ERROR: Encountered errors while bringing up the project.
Причина: Контейнеры отдельных нод или сервисов уже используются запущенными контейнерами.
Решение: Если вам необходимо пересобрать платформу заново, остановите ее при помощи команды docker-compose down . При помощи команды docker stop [ID контейнера] остановите запущенные контейнеры нод и сервисов. Вы можете ввести несколько ID запущенных контейнеров подряд через пробел или остановить все контейнеры при помощи команды docker stop $(docker ps -a -q) . Затем при помощи команды docker rm [ID контейнера] удалите их. ID используемых контейнеров доступны в отчетах об ошибках, подобных приведенному выше. Вы можете удалить несколько контейнеров или все используемые контейнеры одной командой при помощи аналогичного синтаксиса.
3. Ошибка при запуске контейнеров:
ERROR: for nginx-proxy Cannot start service nginx-proxy: driver failed programming external connectivity on endpoint nginx-proxy (86add881e45535e666443cb00e6a6cb66f79a906e412d4f78d2db9d81c6d63d7): Error starting userland proxy: listen tcp 0.0.0.0:80: bind: address already in use ERROR: for nginx-proxy Cannot start service nginx-proxy: driver failed programming external connectivity on endpoint nginx-proxy (86add881e45535e666443cb00e6a6cb66f79a906e412d4f78d2db9d81c6d63d7): Error starting userland proxy: listen tcp 0.0.0.0:80: bind: address already in use ERROR: Encountered errors while bringing up the project.
Причина: Порт 80:80 на вашей машине занят другим приложением.
Решение: Остановите контейнеры при помощи команды docker-compose down . Затем измените параметр ports секции nginx-proxy в файле docker-compose.yml, выбрав свободный порт:
nginx-proxy: image: nginx:latest hostname: nginx-proxy container_name: nginx-proxy ports: - "81:80"
После этого клиент и REST API будут доступны по адресу 127.0.0.1:81 или localhost:81. Остальные сервисы будут доступны по адресам со своими прежними портами.
4. Ошибка при переходе по адресу 127.0.0.1 или localhost в браузере Mozilla Firefox:
SSL_ERROR_RX_RECORD_TOO_LONG
Причина: Вход на localhost по умолчанию выполняется через HTTPS, однако при развертывании платформы в ознакомительном режиме SSL не предусмотрено.
How to Solve ‘Installation Failed’ Errors in Waves Central
Learn how to solve any ‘Installation Failed’ error message while using Waves Central. Locate the specific error you are encountering on this page and follow the steps one at a time, trying to install before moving on to the next step.
If you have encountered a ‘Failure to Uninstall’ error, please refer to this article.
If you encounter other errors that are not listed on this page, make sure you are running the latest version of Waves Central.
Installation failed – Please check your internet connection
This error is displayed when Waves Central is unable to access our servers to download files, or is having an issue synchronizing with our servers.
- Access Waves Central’s Settings tab, then press Clear next to ‘Clear Central cache.’
- Restart your computer.
- In case Internet connection is available but the issue persists, please try replacing Network (Ethernet) cable/s or connect to a different Wi-Fi Network.
- If you’re trying to install a product that includes samples (i.e., an Instrument, COSMOS, a bundle, or Waves Creative Access), try installing it without samples. You can then download all of the samples, or the required sample library for your product here.
- If you are using any firewall, antivirus protection software or browser add-ons, add an exception for Waves Central in the software’s settings, or temporarily disable these software programs and add-ons one by one to eliminate the possibility that Waves Central has been blocked by such programs. A list of such apps can be found in General Troubleshooting Tip #6 at the bottom of this page.
- This error may also occur if the sample library location is not accessible to Waves Central.
- Access Waves Central’s Settings tab, then press Change next to ‘Sample libraries data folder.
- Set the location to: Applications > Waves > Data > Instrument Data.
Installation failed – Please quit audio applications and retry
If any Audio application is currently open, Waves Central will have an issue writing files to your system.
- Quit all open audio applications, then re-launch Waves Central.
- If the error persists, quit any other open applications, and re-launch Waves Central.
- Restart your computer.
- Once installation has started, avoid launching any other applications (including DAWs and other music applications).
Installation failed – Please restart or contact support if repeats
This means that Waves Central is encountering an issue when attempting to write files to your computer..
- Quit all running programs/applications except for Waves Central.
- Access Waves Central’s Settings tab, then press Clear next to ‘Clear Central cache.’
- If you’re trying to install a product that includes samples (i.e., an Instrument, COSMOS, a bundle, or Waves Creative Access), try installing it without samples. You can then download all of the samples, or the required sample library for your product here.
- Restart your machine.
- Uninstall any previously installed Waves products. Full instructions can be found here.
- Verify that you have Administrator privileges on your operating system.
- If you do not, or if the issue persists, create a new Administrator user account.
Installation failed – The user hasn’t granted permission
This is often displayed when Waves Central encounters a permission issue when trying to read or write a file to or from your drive:
If you are prompted with a ‘Waves Central wants to make changes’ message, please allow this by clicking ‘Yes’ in Windows or by typing your Mac’s System User and Password in order to grant proper permissions.
-
Ensure you have granted Waves Central permission to run its processes:
- Windows: After clicking ‘Install’, click Yes when prompted by a message that reads ‘Do you want to allow this app to make changes to your device?’
- Mac: After clicking ‘Install’, enter your Mac’s Username and Password when prompted, then click OK.
General Waves Central Troubleshooting Tips:
- Access Waves Central’s ‘Settings‘ page and run the ‘Fix permissions and ownership‘ process.
- Windows users: Set User Account Control Settings to “Never Notify”:
- Press the [Win key], type UAC and click Change User Account Control settings.
- Move the slider to the Never notify position, and click OK. If you’re prompted for an administrator password or confirmation, type the password or provide confirmation.
- Restart your computer to apply this change.
- Make sure the system Time and Date are correct. If they aren’t, set them correctly and then re-launch Waves Central.
- If you are connected to the internet via proxy, temporarily disable it.
- Windows: Go to Control Panel > Internet Options. On the Connections tab, click the LAN Settings button and uncheck Use proxy server for your LAN.
- Mac: Go to the System Preferences > Network > Advanced > Proxies tab.
Under Proxies, make sure nothing is checked in the list.
- If you are connected via a business network, ask your IT department or internet service provider (home connection) whether something might be preventing Waves Central from connecting to our servers and writing the required information.
- Temporarily disable any of the following third-party security applications and add-ons you may have installed, if you are experiencing issues with Waves Central:
- Download the Offline Installation Folder for Windows | Mac
- Unzip the folder to your desktop
- Browse to the offline installer folder you just unzipped. It will be named «Waves — xx.xx.xx«
- Run the file named Install.cen
- Waves Central will open on the Offline Installer page
- From the list, select the plugins you wish to install
- Click Install
- Troubleshooting
- Waves Central